CREATE A RAID ARRAY
In order to create a RAID array, you'll need two disks (RAID 1) or at least two disks (RAID 0) that aren't already
included in another RAID. If your LaCie 5big shipped with disks, you'll first need to delete the factory default
RAID 0 array before you can create a new array (refer to
1.
If your LaCie 5big shipped without disks, install them first (see
turned on and connect to your Mac as described in
2.
Navigate to the Finder.
3.
Go to the pulldown menu Go > Utilities.
4.
The Utilities window will open. Click twice on the application Disk Utility.
5.
Connected storage devices are listed on the left side of the Disk Utility window.
LaCie 5big Thunderbolt™ Series User Manual
Delete a RAID Array
for instructions.
Install
Disks). Make sure the product is
Get
Connected.
26