Emerson CKD3810 Owner's Manual page 15

Important Notes About Programmed Playback
• After you enter the last track in the memory the PROGRAM indicator will
continue flashing for an additional 10 seconds. If you press the PLAY/PAUSE
button during that 10 second period, playback of the programmed tracks s
will begin. If the PROGRAM indicator stops flashing before you press the PLAY/
PAUSE button, the player exits the programmed playback mode and
playback will begin on track 1 as usual. To play the programmed tracks press
the PROGRAM button again and then press the PLAY/PAUSE
• After all programmed tracks have played the player stops but the PROGRAM
indicator remains ' On' and the program remains in the memory. If you press
the PLAY/PAUSE
• To clear the program from the memory after the disc stops press the PROGRAM
button and then press the STOP
' Off' and the program is cleared. Opening the CD door also clears the program.
However the program cannot be cleared by pressing the POWER button to
shut the unit ' Off' , or by switching to the radio function.
Program Repeat
You may use the Program and Repeat features together to repeat a programmed
sequence of tracks. Simply enter the desired tracks in the program memory as
described above, then press the REPEAT button twice to select ' Repeat/All' (the
Repeat and Program indicators will both come ' On' ). Press PLAY/PAUSE
begin Program Repeat playback.
CKD3810_ib.p65
button the programmed tracks will play again.
button. The PROGRAM indicator goes s
14
14
button.
18/3/2002, 14:10
to