Snooze Function - Emerson CKD2328 Owner's Manual

SNOOZE Function

After the alarm turns on in the morning you can use the Snooze function to grab a
few more minutes sleep before the alarm sounds again. To activate the Snooze
function you can press the SNOOZE button on the top cabinet, or you can simply
wave your hand in front of the Snooze Sensor on the front panel.
The effective operating range of the Snooze Sensor is approximately 2 inches.
The Snooze function will stop the alarm for 5 minutes and then turn the alarm on
again. The Snooze operation can be repeated several times within one hour. But
after one hour the alarm will not turn on again.
Remote Snooze Operation (Model CKD2330 Only)
After the alarm comes on in the morning you may also activate the SNOOZE
function by pressing any button on the remote control EXCEPT THE STANDBY/
ON BUTTON. The alarm will stop for 5 minutes and then turn on again.
29
CKD2328_2330_B091103.p65 29 11/9/2003, 14:52