Replacing The Remote Control Battery - Motorola LS720D User Manual

1.4 Replacing the remote
control battery
The supplied remote control comes installed with a CR2025
lithium battery. When you need to replace the battery, follow
the steps below.
1.
Slide the locking tab to the right.
2.
Pull out the battery holder.
10
3.
Insert the new battery into the battery holder. The
battery must be placed with the positive pole facing
upwards in the illustrated position.
4.
Slide the battery holder into the remote control.
WARNING
Protect the battery from overheating or excessive
z
moisture.
Failure to replace the battery in the correct manner may
z
result in damage to the battery.
Use only the approved specified batteries.
z
Properly recycle or dispose of used batteries according to
z
local guidelines and regulations.
Do not throw batteries into fire. This may result in an
z
explosion.
If the battery is completely drained or the remote control
z
is not in use for a long time, remove the battery to prevent
leakage.
Getting started