Removing A Memory Card; Connecting A Usb Device; Replacing The Remote Control Battery - Motorola MBP701 User Manual

2.4

Removing a memory card

Simply pull the card out of the slot gently.
NOTE
Do not insert a micro or mini memory card without an
adapter.
2.5

Connecting a USB device

To insert the USB drive flash drive, push the drive firmly
into the USB slot as indicated below.
NOTE
The USB port on the display unit cannot be used to connect
to a computer.
10
NOTE
• After you insert a photo-loaded memory card or USB
flash drive and connect the Digital Photo Frame to
power, the Digital Photo Frame will automatically start to
display photos in slideshow mode.
• Both ports support hot swap function which allows for
swapping cards and drives while the unit is powered on.
• This frame can play images in JPEG format (.jpg).
Video files are not supported.
2.6

Replacing the remote control battery

The supplied remote control comes installed with a
CR2025 lithium battery - NOTE: Before using the remote
for the first time, you must remove the insulating mylar strip
from the battery compartment, by pulling the clear plastic
strip gently out of the battery holder located at the bottom
edge of the remote control. When you need to replace the
battery, follow the steps below.
GETTING STARTED