Transmitter Button Functions; Replacing Remote Control Batteries - Code Alarm CA 5051 Owner's Manual

Transmitter Button Functions

1 Way
Transmitter
Lock
Unlock
Trunk
Car Finder
Panic
Remote Start
Remote Start
Shut Down
Run Time
Extention
2 / 3 Hour Start
Daily Start Timer

Replacing Remote Control Batteries

1-Way Remote Control:
The batteries (model CR2016) inside each remote control should last approximately
1 year under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control batteries:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old batteries, observing the +/- symbols on the batteries
and replace with new CR2016 batteries.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
2010 Audiovox Electronics Corporation. All rights reserved.
Car Find /
Lock Unlock
Panic
X
X
X
X
X
X
Start Operation Method
Press and Release
Press and Release
Push and Hold (3 Sec)
Press and Release
Push and Hold (3 Sec)
Press and Release (1 or 2 times
X
depending on selectable option)
X Push and Hold (3 Sec)
X Press and Release 4 times.
Ignition ON/OFF, Press and Hold
X
Valet Button, Press Start 4 times
X Press Lock + Start
7