Getting Started; Customer; Notice; Warranty - Cobra XRS 950 Operating Instructions Manual

Installation
Your Detector
Intro Operation

Customer

Warranty

Assistance

Dashboard Mounting
1.
Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
Secondary Icons
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener.

Notice

3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
5. Plug the power cord
into the detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
English
4
Getting Started and

Auxiliary Audio Jack

Your Detector
Intro Operation Customer

Getting Started

Assistance
Power On
Testing
Secondary Icons
System Ready
Volume Control
Rotate clockwise
(away from you)
Notice
To Turn On the Unit and Adjust the Audio Volume
Main Icons
Rotate the On-Off/
Tone
Volume control
Three beeps
clockwise (away
from you).
Intro Operation Customer Warranty
Assistance
Start-Up Complete
Start-up is complete when the display continuously
h
shows the letters indicating the current user settings
Secondary Icons
c
( = City mode,
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition
Notice is Off. If this is the case with your vehicle, you should turn Off or unplug your
detector when parking for lengthy periods.
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
Warranty
On-Off/
Voice
Visual Display
Testing, then The display will
three beeps cycle through and
show the user
System Ready
modes
h i
= Highway mode, = IntelliMute On)
Auxiliary
Audio Jack
Nothing Comes Close to a Cobra
•
•
5
®