Muting An Alert; Notice; Auto Mute Mode; Intellimute - Cobra XRS 950 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty

Muting an Alert

Assistance
Your detector allows you to quickly turn Off an audio Alert by momentarily
pressing the Mute button. If you press the Mute button a second time
during the Alert, the audio Alert will be turned back On.
Secondary Icons

Auto Mute Mode

Auto Mute will automatically reduce the audio volume of all alerts
after four seconds for as long as the signal is detected. The factory
setting is Auto Mute On.

Notice

Mute Button
Press and release
To Turn Auto Mute On
Press and release
Tone
the Mute button
Two beeps
again while no
alert is occurring.
To Turn Auto Mute Off
Press and release
Tone
the Mute button
One beep
while no alert
is occurring.
English
8
Voice
Visual Display
Auto Mute None, after
Auto Mute On blinks
On
Voice
Visual Display
Auto Mute None, after
Auto Mute Off blinks
Off
Settings
Your Detector
Intro Operation Customer
Main Icons

IntelliMute

Assistance
IntelliMute is a unique feature that allows you to avoid alerts you don't
need to hear because you are stopped or moving slowly. By sensing the
"revs" (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts.
Secondary Icons
Intro Operation Customer Warranty
Assistance
Before IntelliMute will work, you must set an activation point for your
engine's revs (see page 10). Whenever the revs are below that point,
IntelliMute will begin muting. The activation point will be stored in
memory and recalled each time the power is turned On. The factory
Secondary Icons
Notice
setting is IntelliMute Off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
Notice
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
IntelliMute On
i h
IntelliMute Button
Press and release
To Turn IntelliMute On
Press and release
Tone
the IntelliMute
Two beeps
button.
To Turn IntelliMute Off
Press and release
Tone
the IntelliMute
One beep
button again.
Warranty
Voice
Visual Display
IntelliMute IntelliMute On blinks, then
On i appears in the display
Voice
Visual Display
IntelliMute None, after
IntelliMute Off blinks
Off
Nothing Comes Close to a Cobra 9
®