TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
2
You cannot program a disc during
playback. If the disc is playing, press the
TOP (I)/POWER OFF button to first
S
stop playback and then follow the
programming steps as follows.
PROG button
PROG indicator will blink in the CD display.
3
1
3
Press the PLAY/PAUSE (
/POWER ON button to begin
Programmed playback and adjust the
VOLUME control and DBBS switch
as desired.
NOTES:
•
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
•
As each program is played, the track number is shown in the display.
•
To clear the memorized program: press the STOP (I)/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will
turn off or open the CD compartment.
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
•
Each track may be stored in the program memory as many times as desired
(up to 20 tracks).
CD OPERATION (CONTINUED)
1
Press the
; the track number and
2
2
3
Select the first track to be played back
using the
SKIP/SEARCH
, then press the PROG button
button
again. Repeat this step to program
additional tracks up to a maximum of
20 tracks.
4
To skip forward or backward through
)
the programs, press the SKIP/
SEARCH
When the disc is through playing, it will
stop.
12
2
1
or
2
1
or
button.