Humminbird PRO Craft PRO View FISHFINDER Operation Manual page 16

USING THE PRO CRAFT UNIT
MENU FUNCTIONS
alarm sounds continuously for about five
seconds, and then intermittently to remind
you that you are still in shallow water.
Fish Alarm. The Fish Alarm alerts you to the
presence of fish, or other targets not con-
nected to the bottom. The Fish Alarm has
three different settings that correspond to
the three different size fish symbols shown
on-screen.
The default setting is "OFF." With the
"Large fish only" setting, the Pro Craft unit
alarms on only those targets that are repre-
sented by the large fish symbols. The Pro
Craft unit can be set to alarm on only large
and medium fish, or set to alarm on all fish.
Once the Fish Alarm is enabled, the Pro
Craft unit emits an audible beep when the
selected size fish symbol appears on-screen.
The sound is slightly different for each of
the three fish symbol sizes, so with practice,
it is possible to distinguish the size of the
detected fish without looking
Set for large fish only
at the unit.
Set for large and medium fish
Triplog. Triplog provides a
Set for all fish
running log of information
based on input from the Temp/Speed sensor.
Since Triplog requires information
from the Temp/Speed sensor to oper-
ate, if this sensor is not detected by
the Pro Craft unit, the Triplog menu
will not appear as an option.
14