Byron Home Easy HE-305 Installation Instructions

HOME
easy
The HE-305 make or break switch is a expansion
unit for the HomeEasy range of products and is
designed to work with all the HomeEasy receiver
sockets and modules.
- Easy Installation
- 2Yr Standby
- On/Off Function
-Selectable Timer -2min to 20min max
- Ideal for Windows and Doors
Pairing/Deleting with Remote Control:
Up to Six remote control units can be paired with each receiver socket or
module. To program a socket press the "Learn" button. The LED will start to
flash, move the switch away from the base unit (at least 10mm) the LED will
stop flashing.
The units are now paired together.
Always refer to the original instruction when using with additional products
Deleting Remote Control:
To delete a remote control that has been paired with a HomeEasy Receiver
Socket or modules, move the switch unit away from the base (min:10mm
apart) so that they are open. Then press the "Learn" button, the LED will start
to blink; move the switch to the base so that the units are together.
The LED will blink twice to confirm that the remote control has been removed
from the receiver's memory.
HE-305 Make or
Break Switch
Base Switch
V1.0
Timmer Setting:
The HE-305 has 8 selectable timer functions, switching on a
remote receiver socket or module for a set time period.
0 - Open (On) Closed (Off )
2M - 2 min
4M - 4 min
8M - 8 min
To select the required timer settings use a small screwdriver to rotate the dial
on the reverse of the base unit.
Location:
The HE-305 can be used in any location where the switch unit will move a
minimum of 20mm from the base unit and no further than 10mm part when
together.
Attache the HE-305 in the required location using 4 screws (included).
10M - 10 min
15M - 15 min
20M - 20 min (Max)
Max distance of 10mm when closed