Input Menu; Progressive; Ideo Nr , C - Hitachi CP-RX80 Operating Manual

INPUT menu

INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the
press the cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item

PROGRESSIVE

VIDEO NR
COLOR SPACE
(continued on next page)
/ cursor buttons, and
Using the / buttons switches the progress mode.
TV FILM OFF
• This function is performed only for the VIDEO or S-VIDEO input,
and for 480i@60 or 576i@50 signal at the COMPUTER IN input.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
Using the / buttons switches the noise reduction mode.
HIGH MID
• This function is performed only for the VIDEO or S-VIDEO input,
and for 480i@60 or 576i@50 signal at the COMPUTER IN input.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the / buttons switches the mode for color space.
AUTO RGB
• This item can be selected only for a computer signal or a
component video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Description
LOW
SMPTE240 REC709
INPUT menu
REC601
31