Table of Contents
Advertisement
Colour System
select Colour System. By press-
By pressing
/
ing
/
button, you can change the colour system to
PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or
AUTO.
VCR
select VCR. By pressing
By pressing
/
button, you can set the VCR to ON or OFF.
Store
By pressing
/
button, select Store. Press
OK button to store the adjustments. "Stored..." will
be displayed on the screen.
Source menu
By pressing
/
button, select the fifth icon. Source
menu appears on the screen.
SOURCE
TV
DTT
AV-1
AV-2
AV-2 S
In source menu, highlight a source by pressing
button and switch to that mode by pressing
OK button. Source options are; TV, DTT, AV-1, AV-2,
AV-2 S, AV-3 (*), FAV, S-Video, YPbPr, HDMI-1,
HDMI-2 and PC.
* Note: AV-3 is only functional for the models with 3
SCART sockets.
PC Mode
Installation
• Power off both Computer and Display before making
any connections.
• Set your PC's resolution correctly before connect-
ing to the TV. See the table on Appendix A on page
/
34.
• Use 15-pin display cable to connect a PC to the LCD
TV.
or
Menu System in PC mode
Sound Menu/Feature Menu
The items in these menus are described at Sound &
Feature Menu explained in "Menu System".
PC Picture Menu
By pressing
Picture menu appears on the screen.
Brightness, Contrast and Colour Temperature adjust-
ments in this menu are identical to adjustments de-
fined in TV picture menu in "MENU SYSTEM".
PC POSITION Menu
By pressing
POSITION menu appears on the screen.
PC POSITION
Autoposition
H Position
V Position
/
Phase
or
Dot Clock
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.
• Select Autoposition item by using
Press or OK button.
Warning: Auto position adjustment recommended to
be done with the full screen image for the proper
adjustment.
- 25 -
/
button, select the second icon. PC
/
button, select the sixth icon. PC
/
buttons.
Advertisement
Table of Contents
