Table of Contents
Advertisement
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the P+ or P-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the "
(stand-by)" button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
For Displaying
MENU
Menu Options
+
1- Press
to display the menu.
2- Press
/
button to select an icon.
3- Use
/
button to highlight. Press
options in analogue TV mode. UseOK in DTV mode
for viewing a submenu.
4- Press
/
buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press
.
These explanations are available for the navigation
of the whole menu system. To select options that are
explained in the following parts, refer to "Navigating
The Menu System".
GUIDE
For Navigation
OK
RETURN
To Confirm Choices
for more
Initial Settings
When the TV is turned on for the first time, IDTV is on
first. Because this is the first time that IDTV has been
used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen.
The message "Welcome please select your lan-
guage!" is written in all language options sequen-
tially in the menu on the screen.
By pressing
or
you want to set and press OK button. In the menu
"Set Language" is written next to "OK" item to indicate
that "Press SELECT button to set the highlighted lan-
guage option."
You can get information about the menu usage by
pressing
button. And press
exit the help menu.
After then, First time Installation Menu will appear on
screen. By pressing
try item you want to set and press OK button.
First time installation
Choose Country
OK
S et country and continue installation
After the First time Installation is set, the following
message appears on the screen.
Do you want to start automatic search?
• To start automatic search, select Yes, to cancel
select No.
• To select an option "Yes or No", highlight the item by
using
or
The IDTV will automatically tune to the transmission
channels according to selected country standards
looking for digital terrestrial TV broadcasts and dis-
playing the names of channels found. This process
will take about five minutes. To cancel searching, you
can press
button at any time during the process.
Automatic Search
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
MENU
- 10 -
buttons highlight the language
button again to
or
buttons, selected coun-
Yes
No
buttons and press OK button.
Czech
Advertisement
Table of Contents
