Appendixes; Specifications - Citizen CL-S621 User Manual

Appendixes

Specifications

Item
Printing Printing method
Resolution
Max. print width
Max. print length
Print density
Printing speed Printing speed setting
Print mode Batch mode
Tear off mode
Cut mode
Peel mode
Media Types of media
Recommended media
Max. media width
Min. media width
Min. label width
Min. label pitch
Max. media thickness
Max. media length
Min. media length
Min. media thickness
On-board roll media
diameter
Ribbon Recommended ribbon
Max. ribbon width
Min. ribbon width
Max. ribbon length
Max. roll diameter
Inner diameter of the
paper core
Ribbon end tape length
Ribbon end detection
Description
Thermal transfer/Direct thermal
Main scanning line density: 203 dots/inch (8 dots/mm) (CL-S621)
Sub- scanning line density: 203 dots/inch (8 dots/mm) (CL-S621)
Head 864 dots (printable dots: 832 dots) (CL-S621)
Head 1275 dots (printable dots: 1240 dots) (CL-S631)
104 mm (CL-S621)
105 mm (CL-S631)
812.8 mm
Print density is adjustable with software
[For CL-S621]
6, 5, 4, 3 or 2 inches per second (Direct thermal)
4, 3 or 2 inches per second (Thermal transfer)
• 4, 3 or 2 inches per second when the optional peeler is used.
[For CL-S631]
4, 3 or 2 inches per second
Normal printing (single or multiple sheets)
Feeds back media to the tear-off position after printing is completed.
*1 Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through
(Cut through refers to stopping present printing to cut the previous label
when it reaches the cut position. After cutting, printing restarts but a gap
may be created at the seam of the printing at this time.)
*1 Peels labels from the liners after printing them.
Roll, fanfold
(continuous media, die-cuts, continuous tags. paper or tickets)
Thermal transfer: label media (RPR-W Ricoh)
Direct thermal media: label media (150LA-1 Ricoh), tag media (TB2E0V,
Mitsubishi Paper)
1 18.0 mm
19.5 mm
19.5 mm
*2 6.35 mm
0.254 mm
812.8 mm
6.35 mm
0.0635 mm
Max. external diameter: 127mm
Media core: 25.4 to 76 mm
B1 10A Ricoh
1 14.0 mm
25.4 mm
360.0 m
74.0 mm
25.4 ± 0.25 mm
Max. 80.0 mm
Ribbon out detection by a tension sensor
55
Appendixes
300 dots/inch (1 1.8 dots/mm) (CL-S631)
300 dots/inch (1 1.8 dots/mm) (CL-S631)
4.1 inch
32 inch
4.65 inch
0.77 inch
0.77 inch
0.25 inch
0.01 inch
32 inch
0.25 inch
0.0025 inch
5 inch
1 to 3 inch
4.50 inch
1.00 inch
1,181 ft
2.90 inch
1.00 ± 0.01 inch
3.15 inch