Cisco DPC3208 User Manual page 39

How Do I Mount the Cable Modem on a Wall? (Optional)
If you wish, you can mount the cable modem to a wall. This section describes how to
mount the cable modem to a wall, and includes a list of equipment you will need
along with suggestions for choosing an appropriate place to mount the cable
modem.
Important: If you have not already done so, insert the battery in the cable modem
before you mount the cable modem on a wall (if desired) or before you install the
cable modem in your home. For assistance inserting the battery in the cable modem,
go to Install the Battery (on page 13).
Select an Appropriate Place to Mount the Cable Modem
You may mount the cable modem to a wall that is made of cement, wood, or
drywall. When choosing an appropriate mounting place, refer to the following
recommendations:
Ensure that the mounting location is free of obstructions on all sides, and the

cables should be able to easily reach the cable modem without strain.
Leave sufficient clearance between the bottom of the cable modem and any

flooring or shelving underneath to allow access to cabling.
Allow enough slack in all cables so that the cable modem can be removed for any

required maintenance without disconnecting the cables.
Choose a location that allows adequate ventilation around the cable modem.

Equipment Needed
Verify that you have the following items that you will need to mount the cable
modem:
Two wall anchors for #8 x 1-inch screws

Two #8 x 1-inch pan head sheet metal screws

Drill with a 3/16-in. wood or masonry bit, as appropriate for the wall

composition
A copy of the wall-mounting illustrations shown on the following pages

Position the Cable Modem
Use the following illustrations to guide you in positioning the cable modem on the
wall.
4027620 Rev A
Installation Preparations
15