Colour System
By pressing
/
select Colour System. By press-
ing " " / " " button, you can change the colour
system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC
3,58 or AUTO.
VCR
By pressing
/
select VCR. By pressing " " /
" " button, you can set the VCR to ON or OFF. .
Store
By pressing
/
button, select Store. Press " "or
"OK" button to store the adjustments. "Stored..." will
be displayed on the screen.
Source menu
By pressing " " / " " button, select the fifth icon.
Source menu appears on the screen.
SOURCE
TV
DTV
EXT-1
EXT-2
EXT-2 S
In source menu, highlight a source by pressing
button and switch to that mode by pressing " "
or "OK" button. Source options are; TV, DTV, EXT-1,
EXT-2, EXT-2 S, FAV, S-VIDEO, HDMI, YPBPR and
PC.
Note: You can mark desired source options by press-
ing OK button. Therefore, when
pressed, only the marked source options will
be available.
PC Mode
Installation
• Power off both Computer and Display before making
any connections.
• Set your PC's resolution correctly before connect-
ing to the TV. See the table on Appendix page.
• Use 15-pin display cable to connect a PC to the LCD
TV.
Note: PC menu will not be active for TV sets without a
PC input.
Menu System in PC mode
Sound Menu/Feature Menu
The items in these menus are described at Sound &
Feature Menu explained in "Menu System".
PC Picture Menu
By pressing
Picture menu appears on the screen.
Brightness, Contrast and Colour Temperature adjust-
ments in this menu are identical to adjustments de-
fined in TV picture menu in "MENU SYSTEM".
PC POSITION Menu
By pressing
POSITION menu appears on the screen.
/
button is
AV
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.
• Select Autoposition item by using
Press or "OK" button.
Warning: Auto position adjustment recommended to
be done with the full screen image for the proper
adjustment.
GB - 26 -
/
button, select the second icon. PC
/
button, select the sixth icon. PC
PC POSITION
Autoposition
H Position
V Position
Phase
Dot Clock
/
buttons.