Table of Contents
Advertisement
All the services are searched and a channel table is
created automatically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search:
In Manual Search, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level, signal quality and network name are
shown at the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight "First Time In-
stallation" menu item and press "SELECT" button,
then you will be asked to tings. Selecting "Yes" by
pressing "SELECT" button while the "Yes" is high-
lighted and then the existing channel table will be de-
leted.
Are you sure you want to delete all channels and
settings for first time installation?
Yes
After factory settings is loaded, "First Time Instal-
lation" menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using
buttons, select the desired language option, and press
"SELECT" button to activate.
After the language is selected, a message asking for
automatic search start appears on the screen.
Do you want to start automatic search?
Yes
Highlight "Yes" item by pressing
press "SELECT" button to start installation. After search
is completed for digital channels, a message asking
search for analogue channels appears on the screen.
Do you want to search for
analogue channels?
Yes
No
or
No
or
buttons and
No
GB - 17 -
Highlight "Yes" item by pressing
press "SELECT" button to searh for analogue
channels.The following menu appears on the screen
for analogue channel search.
Auto Program
Country
Language
TXT Language
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
English
By pressing " " or " " button, adjust the Country
item and press " " to highlight "Language" item.
Use " " or " " button to set "Language". Use " "
or " " buttons to select "TXT Language" and set it
by using " " or " " buttons. Press "OK" button to
continue.
Configuration
Press "M" button to display the Main Menu and the
button twice to highlight Configuration, then press "OK"
button to display the Configuration menu. Press "M"
button to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are displayed in
a list, along with a quarter-screen image of the cur-
rently selected channel. You can select a function by
highlighting the corresponding menu line using the
or
buttons.
or
buttons and
Ok
Cancel
Advertisement
Table of Contents
