Table of Contents
Advertisement
Analogue TV Menu System
Picture Menu
PICTURE
Mode
Contrast
Brightness
Sharpness
Colour
In picture menu if PC,YPbPr or HDMI modes are
selected, resolution information is displayed at the
bottom of the menu osd.
Mode
By pressing
/
button, select Mode. Press
button to choose from one of these options: Cinema,
Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue
By pressing
/
button, select the desired Option.
Press
/
button to set the level.
Hint: Hue is displayed in picture menu when the TV
receives an NTSC signal.
Colour Temp
• By pressing
/
• Press
/
to choose from one of these options:
Cool, Normal and Warm.
Noise Reduction
By pressing
/
button select Noise Reduction.
Press
/
to choose from one of these options:
Low, Medium, High or Off.
Film Mode
Films are recorded at a different number offrames
per second to normal television programmes.
By pressing
/
button, select Film Mode.
Press
/
button to set this feature On or Off. Turn
this feature on when you are watchingfilms to see
the fast motion scenes clearly.
3D Comb
3D Comb is used to improve colour transitions and
colour quality of pictures.
button select Colour Temp.
By pressing
/
button to set this feature On or Off.
Note: 3D Comb feature is not functional in NATU-
RAL picture mode.
Picture Zoom
By pressing
Use
/
buttons, to change picture zoom to Auto,
16:9, 4:3, Panaromic, 14:9 Zoom, Cinema, Sub-
title, or Zoom.
Reset
By pressing
"OK" button to reset the picture modes to factory
default settings.
Store
• By pressing
• Press
or "OK" button to store the adjustments.
"Stored" will be displayed on the screen.
Sound Menu
/
SOUND
Volume
Equalizer
Balance
Headphone
Sound Mode
Volume
By pressing
button to change the level of the Volume.
Equaliser
By pressing
button to change the Equalizer setting. In equalizer
menu, the mode can be changed to Pop, Rock, Jazz,
Flat, Classic or User. Select the desired frequency
by
/
button and increase or decrease the fre-
quency gain by pressing
Note: Equalizer menu settings can be altered only
when the Equalizer Mode is in User.
Balance
By pressing
to change the level of the balance.Balance level can
be adjusted between -32 and 32.
GB - 21 -
/
button, select 3D Comb. Press
/
button select Picture Zoom.
/
button, select Reset. Press
/
button select Store.
/
select Volume . Press
/
select Equalizer.Press
/
button.
/
select Balance.Press
or
/
/
/
button
Advertisement
Table of Contents
