Hitachi VT-FX960EUKN Instruction Manual page 28

(RECORDING TV PROGRAMMES)
Controls
7
8
9
STOP
STEREO
M1M2
1 2 3
4 5 6
7 8 9
0
28
VCR display
STOP PLAY/STILL
REC
TAPE
400x DRIVE
NAVIGATION
PROG
STOP
CH1/2
To view a programme while recording it
You can view a programme while recording it by
selecting the video programme number on your
TV.
To record one programme while viewing another
You can record one programme while viewing
another by selecting the programme you want to
view on your TV. The recorded programme can
be viewed later at your convenience.
After the recording has been made press the STOP
button on remote control or press the STOP
button on the VCR.
Recording a stereo broadcast
The basic procedure for recording a stereo
broadcast is the same as it is for normal recording.
The STEREO indicator will appear on the TV
screen for a few seconds if a programme being
broadcasted in stereo is selected.
Recording a bilingual broadcast
The basic procedure for recording a bilingual
programme is the same as it is for normal
recording.
The M1M2 (bilingual) indicator will appear on the
TV screen if a station broadcasting a bilingual
programme is selected.
Note: You can monitor the desired audio channel
with the CH1/2 select button on the remote control
handset. Press the CH1/2 select button until you
hear the desired audio channel. The selected
audio channel is shown on the VCR. During
bilingual broadcasts
is the foreign language.
CH1/2
PDC
is the main language and