Table of Contents
Advertisement
AV Mode
Press the "TV/AV" button at the control panel on the
the TV to switch your TV to AV modes.
Operation with Remote Control
The remote control of your TV is designed to control
all the functions of the model you selected. The func-
tions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in the
following sections.
Volume Setting
Press " V +" button to increase volume. Press "V -"
button to decrease volume. A volume level scale
(slider) will be displayed in the middle at the bottom of
the screen.
Programme Selection (Previous or next
programme)
• Press "P-" button to select the previous programme.
• Press "P+" button to select the next programme.
Programme Selection (direct access)
Press digit buttons on the remote control to select
programmes between 0 and 9. TV will switch to the
selected programme. To select programmes between
10-99 press the digit buttons consecutively which
programme you want to select (eg. for programme
27, first press 2 and then 7). When it is too late to
press second digit button only the first digit programme
will be displayed. The limit of the delay time is 3 sec-
onds.
Press directly the programme number to reselect single
digit programmes.
Menu System
Picture Menu
PICTURE
Mode
Contrast
Brightness
Sharpness
Colour
In picture menu if PC,YPbPr or HDMI modes are
selected, resolution information is displayed at the
bottom of the menu osd.
Mode
By pressing
button to choose from one of these options: Cinema,
Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue
By pressing
Press
/
Hint: Hue is displayed in picture menu when the TV
receives an NTSC signal.
Colour Temp
• By pressing
• Press
/
Cool, Normal and Warm.
Noise Reduction
By pressing
Press
/
Low, Medium, High or Off.
Film Mode
Films are recorded at a different number offrames
per second to normal television programmes.
By pressing
Press
/
this feature on when you are watchingfilms to see
the fast motion scenes clearly.
English - 10 -
button, select Mode. Press
/
/
button, select the desired Option.
button to set the level.
button select Colour Temp.
/
to choose from one of these options:
button select Noise Reduction.
/
to choose from one of these options:
/
button, select Film Mode.
button to set this feature On or Off. Turn
/
Advertisement
Table of Contents
