Adobe 12040118 - After Effects Standard Using Manual page 168

Help
Using Help
Description
The remove method of renderQueueItem deletes the referenced item from the Render Queue.
Parameters
None.
Returns
None.
RenderQueueItem render attribute
a p p.p ro j e c t . re n d e r Q u e u e . i t e m ( i n d e x ) . render
Description
The render attribute determines whether an item will render when the Render Queue is started.
Type
Boolean; read/write.
RenderQueueItem saveAsTemplate() method
a p p.p ro j e c t . re n d e r Q u e u e . i t e m ( i n d e x ) . save AsTemplate ( na m e )
Description
The saveAsTemplate method of RenderQueueItem saves the item's current render settings as a new template
with the name passed as a parameter.
Parameters
name name of the new template
Returns
None.
RenderQueueItem skipFrames attribute
a p p.p ro j e c t . re n d e r Q u e u e . i t e m ( i n d e x ) . sk ipFr a m e s
Description
The skipFrames attribute specifies the number of frames to skip when rendering. It is used to do quicker
rendering tests than a full render. The total length of time remains unchanged.
A value of 0 specifies no skipped frames and results in regular rendering of all frames. A value of 1 specifies
that every other frame is to be skipped. This is equivalent to "rendering on twos." Higher values will skip a
larger number of frames. For example, if skip has a value of 1, for sequence output you'd get half the number
of frames and for movie output each frame would be double the duration.
The permissible range of values for skipFrames is [0..99].
Using Help
Reference
Back 168
Back 168