Adobe 12040118 - After Effects Standard Using Manual page 147

Help
Using Help
Description
This method specifies whether the keyframe has temporal continuity.
Note that temporal continuity has an effect at this keyframe only if the KeyframeInterpolationType is BEZIER
for both keyInInterpolation(keyIndex) and keyOutInterpolation(keyIndex).
Parameters
keyIndex
newVal
Returns
None.
Property setTemporalEaseAtKey() method
a p p.p ro j e c t . i t e m ( i n d e x ) . l ay e r ( i n d e x ) . p ro p e r t y ( n a m e ) . se t Temp or al Ea se AtKe y( ke y In d e x , i n Te mp o ra l E a s e ,
o u t Te mp o ra l E a s e )
Description
This method sets the in and out temporal ease for the given key.
If outTemporalEase is not provided, then outTemporalEase will be set equal to the inTemporalEase.
InTemporalEase and outTemporalEase are arrays of KeyframeEase objects. The dimension of the array
depends on the dimension of the property's keyframeValueType. For ThreeD, the dimension of the array is 3.
For TwoD, it is 2. For all other keyframeValueTypes, including TwoD_SPATIAL and ThreeD_SPATIAL types,
it is 1.
Parameters
keyIndex
inTemporalEase
outTemporalEase
Returns
None.
Property setValue() method
a p p.p ro j e c t . i t e m ( i n d e x ) . l ay e r ( i n d e x ) . p ro p e r t y ( n a m e ) .setValue( ne wValue )
Description
The property setValue method sets the static value of the property.
If the property has keyframes, this method cannot be used; see "Property setValueAtTime() method" on
page 148 or "Property setValueAtKey() method" on page 148 instead. If used with a property that has
keyframes, this method generates an exception and an error is displayed.
The type of value to use as an argument depends on the propertyValueType.
Using Help
Integer; the keyframe being set
Boolean; if set to true, keyframe is set to be continuous
Integer; the keyframe being set
KeyframeEase; the incoming temporal ease setting
KeyframeEase; the outgoing temporal ease setting
Reference
Back 147
Back 147