Searching For Pois By Categories - Pioneer AVIC-U250 Owner's Manual

Searching for and selecting a location
p When the route is set and any of the above
search categories are selected, the category
search will occur along the route.
p When a route has not been set and any of
the above search categories are selected,
the category search will occur around your
current position.
p When the current position is not available
(no GPS signal) and any of the above
search categories are selected, the category
search will occur around your last known
position.
3 Touch the POI you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
39.
Searching for POIs by
categories
You can search for POIs by their categories
and subcategories.
1 Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
= For details of the operations, refer to Screen
switching overview on page 19.
2 Touch [Find], then [Find Places].
3 Touch [Custom Search].
4 Select the area around which the POIs
should be searched for.
! In a City:
Searches for a place within a selected city.
(The result list will be ordered by the dis-
tance from the center of the selected city.)
! Around Last Known Position:
Searches around the current position or if it
is not available, around the last known posi-
tion. (The result list will be ordered by the
distance from this position.)
! Around Destination:
Searches for a place around the destination
of the current route. (The result list will be
ordered by the distance from the destina-
tion.)
! Along Route:
Searches along the current route, and not
around a given point. This is useful when
you search for a later stopover that results
in a minimal detour only, such as searching
for upcoming gas stations or restaurants.
(The result list will be ordered by the length
of the necessary detour.)
p If you have selected [In a City], select the
city to search in.
Chapter
06
33
En