Tune Scan Function; Tune Start Function; Receiving And Tuning To An Alert; Search Function - Alpine CDE-143BT Manual

Notes
• If you try to store when the memory is full, "MEM FULL" is displayed
followed by "REPLACE/CANCEL". If you want to replace an existing
alert item, select "REPLACE" by turning Rotary encoder, and then
press ENTER, the existing alert list stored in memory is displayed.
Select one of the stored alerts using the Rotary encoder. To replace the
selected alert, press ENTER and an "ART/SONG SAVED" pop-up
screen is followed by an "XX U(sed)/YY E(mpty)".
• You can manage the stored Alert memory setting on Setup mode, for
details, refer to "Managing Artist and Song Alerts" on page 33.
• If no operation is performed for 60 seconds, the setting mode is
canceled.

Tune Scan Function

While listening to SiriusXM Satellite Radio, you can scan through all the
songs you have not yet listened to from your current band of preset
channels.
1
Press and hold /ENTER/OPTION for at least 2 seconds
when you want to scan the preset music.
The Option mode is activated.
2
Turn the Rotary encoder to select TUNE SCAN, and then
press /ENTER.
The TUNE SCAN mode is activated, and the "R" indicator will
blink.
Press /ENTER during scan playback, tune scan mode will be
canceled and the selected track will be played back normally, at
the same time the "R" indicator disappears.
Press r during scan playback to cancel Tune Scan mode. The
tuner returns to the channel before Tune Scan was initiated and
"SCAN STOP" will be displayed.
Notes
• This function is available when SiriusXM SXV200 Vehicle Tuner is
connected.
• If no operation is performed during the scanning process, when
scanning finishes, the next mode depends on the SiriusXM Tuner.
• During Tune Scan mode, the artist name song name will be displayed in
the first 3 seconds.
• The SiriusXM Tune scans through the songs from the preset music
channels on the current band only, scanning from oldest to newest.

Tune Start Function

When the user tunes to a preset station that plays music-type content,
the SiriusXM tuner plays the currently playing track for that channel
from the track start. Therefore, the user can enjoy the full track (i.e.,
song) rather than playing the channel from the current live play point.
To cover the case when the user prefers non-Tune Start Function, you
can set TUNE START to OFF, for details, refer to "Setting Tune Start" on
page 34.
Note
• Preset stations that play other than music-type content will start playing
the channel from the current live play point when selected.

Receiving and Tuning to an Alert

Whenever a stored sports team, artist, or song is playing on another
channel, an interruption ALERT appears on the unit display. To tune to
the game, artist or song identified by the alert, follow the steps below:
1
Turn the Rotary encoder to select the desired game, artist
or song from the list of active alerts.
2
Press ENTER.
Notes
• If no operation is performed for 5 seconds, the unit returns to normal
mode.
• Sports teams/Artist name and Song title which you have stored and
which are currently playing will be displayed in a category called "MY
GAMES"/"MY MUSIC" in search mode. For details, refer to "Search
Function" on page 35.

Search Function

You can search for SiriusXM programming content by Category or by
Channel.
1
Press ENTER in the SiriusXM mode.
2
Turn the Rotary encoder to select the desired Category,
and then press ENTER.
3
Turn the Rotary encoder to select the desired Channel
Name, and then press ENTER.

Searching by Channel

1
Turn the Rotary encoder to select ALL CHANS after step 1,
and then press ENTER.
All Channels will be displayed in a list.
2
Turn the Rotary encoder to select the desired channel,
and then press ENTER to confirm.
Note
• Press k, the information of the broadcasting channels will be
displayed. You can choose the desired channel from the artist name list
or song name list.
Each time you press k, the display changes as below.
Channel number  Channel name  Artist name 
Song name  Channel number

Searching by My Music

1
Turn the Rotary encoder to select MY MUSIC
and then press ENTER.
The artist names and song names that you have stored and are
currently playing will be displayed in a list.
Displayed only when the stored song or artist is broadcasting.
2
Turn the Rotary encoder to select the desired artist/song,
and then press ENTER to confirm.
The channel of the selected artist/song being broadcast is
received.
*
after step 1,
35
-EN