Table of Contents
Advertisement
2. Inventory
Cabinet & Panel Hardware
Surface-Mount Backboxes
ABS-1F
This surface mounted backbox provides for the remote
mounting of a single ACM-16ATF Series or ACM-
32AF Series annunciator in a surface-mount enclosure.
Knockouts are provided for use with 1/2" conduit. The
annunciator mounts directly to the box without a dress
plate.
Height = 8-1/2" (21.59 cm)
Width = 4-1/2" (11.43 cm)
Depth = 1-3/8" (3.49 cm).
ABS-2F
This surface mounted backbox provides for the surface mounting of an
annunciator-expander combination. Knockouts are provided for use with
1/2" conduit. The annunciator module mounts directly to the box without
a dress plate.
Height = 8-1/2" (21.59 cm)
Width = 8-15/16" (22.7 cm)
Depth = 1-3/8" (3.49 cm).
Note: The ABS-1F and ABS-2F will not support the installation of the AKS-1
Annunciator Key Switch.
ABS-1TF
The ABS-1TF is a surface mounted backbox for mounting one ACS Series
annunciator. This backbox has an increased depth that allows mounting of
the AKS-1 Annunciator Key Switch.
Height = 9-15/16" (25.24 cm)
Width = 4-5/8" (11.75 cm)
Depth = 2-1/2" (6.35 cm).
14
Cabinet & Panel Hardware
ACM-16ATF/ACM-32AF Manual PN 51480:A0 02/02/01
Advertisement
Table of Contents
