Care & Maintenance; Replacing The Ac Mains Fuse - Mark Levinson 512 Owner's Manual

Nº512 CD/SACD™ Player
Note
Caution!
Replacing the AC
Mains Fuse
Care & Maintenance
The Nº512 requires routine care and maintenance to ensure optimal
performance. The bulleted items indicate maintenance procedures
that should be performed on a regular basis.
Failure to perform the maintenance procedures included in this section
may void the manufacturer's warranty and/or standard repair policies.
• To remove dust from the Nº512's exterior surface, use a feather
duster or a low-pressure blower.
• To remove dirt and fingerprints from the Nº512's exterior
surface, use a soft, lint-free cloth. DO NOT use metal polish or a
cloth made with steel wool.
If needed, this cloth can be dampened with isopropyl alcohol.
DO NOT dampen the cloth with benzene, acetone-based
cleaners, or other commercial cleaners.
Wipe the Nº512's exterior surface in the same direction as the
grain of the brushed aluminum.
DO NOT apply liquid directly to the N
Doing so may damage electrical components.
Use these instructions to verify the condition of the fuse and to
replace one that has blown.
1. Power down the Nº512.
2. Remove the power cord from the rear panel connector.
3. Use a small flat-bladed screwdriver to remove the fuse drawer
from the AC Mains inlet.
4. Verify whether the fuse is good or blown.
5. Replace the fuse with a new one, if required. Verify that the new
fuse matches the rating and size noted on the fuse label, located
beside the AC Mains inlet on the rear panel of the Nº512.
6. Carefully slide the fuse drawer into the AC Mains inlet and press
firmly in place.
o
512' s exterior surface.
41