Mark Levinson 512 Owner's Manual page 36

32
7. Select the "Use the Following IP Address" option. The IP
Address, Subnet Mask, and Default Gateway boxes are no longer
grayed out and can now be modified.
8. Enter the following values:
• IP address: 192.168.50.x
where x stands for a number other than 8
• Subnet mask: 255.255.255.0
• Do not enter a value in the Default Gateway parameter
Note
192.168.50.8 is the default static IP address for the Nº512. The
computer must be on the same subnet and have a unique address.
9. Click "OK" to save and exit the menu.
10. Open the Internet Explorer Web browser.
11. From the menu bar, select the Tools
12. Select the Connections tab.
13. Click the LAN Settings button.
14. Verify that "Use a proxy server for your LAN" is NOT checked.
15. Click "OK" to save and exit the menu.
Network Setup for Windows 2000
1. From the Start menu, select Settings
2. Double-click on the Network and Dial-Up Connections option.
3. Double-click on the Local Area Connection option.
4. Click the Properties button to open the Local Area Connection
Properties menu.
Note
If the computer is not currently connected to an active network, Step 3
has already opened the Local Area Connection Properties menu.
5. Click on the Internet Protocol (TCP/IP) line item so that it is
highlighted.
6. Click the Properties button.
Mark Levinson
Internet Options menu.
Control Panel.