Specifications; Phono Section; Line Section - Mark Levinson 26 Operating Manual

Phono section

Line section

12

Specifications

The correlation between published specifications and sonic quality is
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation.
Measurements of the Nº26 yield excellent results by any standards.
However, only those specifications that apply to its actual operation
are included here.
Power consumption:
Mains voltage:
Overall dimensions:
Shipping weight (2 boxes):
Connector complement:
Gain:
Moving-magnet phono option:
Moving-coil phono option:
Input impedance:
Output impedance:
Maximum output (TAPE output):
Recommended load (TAPE outputs):
Gain:
Single-ended:
Balanced:
Input impedance:
Maximum output (MAIN outputs):
Recommended load (TAPE outputs):
For more information, see your Mark Levinson dealer, or contact:
Madrigal Audio Laboratories, Inc.
2081 South Main Street (Route 17), P.O. Box 781
Middletown, Connecticut 06457 USA
Telephone (203) 346-0896
(FAX (203) 346-1540
If purchased in North America, this Mark Levinson product's warranty is owner-transferable.
Warranty conditions are valid only in the country where the product was originally purchased.
For warranty information and conditions on products purchased outside of North America,
contact your local dealer or regional distributor.
50W maximum, depending on options
100V, 120V, 200V, 220V, or 240VAC @ 50/60Hz
18 female RCA-type connectors
2 XLR-type female connectors
2 XLR-type male connectors
1 binding post (turntable ground)
Selectable (see "Set-up and installation")
Selectable (see "Set-up and installation")
Selectable (see "Set-up and installation")
See "Dimensions"
30 lbs. (13.6kg)
3 nine-pin connectors
1 IEC mains connector
38dB, 44dB
58dB, 64dB
10
6V
10K or greater
6dB, 12dB, 18dB
12dB, 18dB, 24dB
14K shunted by 220pf
6V
600 or greater