Tv And Video Recorder; Playback Ntsc; Copy Facility; Search For And Store The Test Signal Of The Video Recorder - Hitachi 32LD8700TU Instructions For Use Manual

Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1.

TV And Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sock-
ets.

Playback NTSC

To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the rear side of the TV.

Copy Facility

Source selection for VCR recording.
• Select Feature menu.
• Select AV-2 Out by pressing
• Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable from the aerial socket
of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the Install menu and select search.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
– Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.

Camera And Camcorder

To Connect To AV Input
Connect your camera or camcorder to AV
(AV-4) input at the rear side of the TV.
• Connect your equipment to the TV via VIDEO
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input at the rear side of the TV.
• Connect your equipment to the TV via S-VHS
Connect The Decoder To The Video
Recorder
Some video recorders have a special Scart
socket for decoder.
• Connect a Scart cable to the Scart socket of
 
/ button.
• To connect your video recorder to the TV, re-
If you want to connect more equipment to
your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket at the rear
side of the TV, to connect headphones.

Connecting Subwoofer

Use Subwoofer Out socket to connect an
external, active subwoofer to the set to give a
much deeper bass effect.
- 32 -
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks to the in-
put using the same colour.
input and audio inputs of AV inputs by using
S-VHS cables.
your decoder and to the special Scart socket
of your video recorder. Refer to the booklet of
your video recorder.
fer to the TV and Video Recorder section.