Fastext; For Fastext; Top Text; Connect Peripheral Equipment - Hitachi 37LD8D20U Instructions For Use Manual

Fastext

Your TV supports the 1000 page Teletext system.
When the page number of any of the 1000 pages in
memory is entered, the system will not search for the
requested page; instead it will display the page auto-
matically. If the requested page is not in memory, the
system will search for the requested page number
and save the 1000 pages including the requested
page into memory after finding it.
• Press the button to move the Teletext screen
forward one page at a time.
• Press the button to move the Teletext screen
backward one page at a time.

For Fastext

The subject-heading for the information may have a
particular colour.
• Press an appropriate RED,GREEN, YELLOW orBLUE
button in order to reach the relevant page quickly.

TOP text

TOP text mode of operation will be activated automati-
cally according to the transmission.
• If TOP text transmission is present, colour coded
buttons will appear in status row.
• If TOP text transmission is not present, status row
will not appear.
The subject-heading for information may be located in
colored box.
In Top mode the "-P/CH" or "P/CH+" commands will
request the next or previous page respectively. If TOP
text transmission is not available, in case of operation
of these commands, wraparound occurs. For example
page 100 appears to be one greater than page 199.

Connect Peripheral Equipment

High Definition

Your LCD Television is capable of displaying High
Definition pictures from devices such as a High Defi-
nition Satellite Receiver or DVD Player. These devices
must be connected via the HDMI socket or Compo-
nent Socket. These socket can accept either 720p or
1080i signals.
Note: When it is desired to watch HDMI source with
a DVI to HDMI cable; in order to enable au-
dio, Audio Input (which is located at the left
side of the antenna input) is to be used to get
DVI device's audio signals.

Via The Scart

The TV has 2 Scart sockets. If you want to connect
peripherals (e.g. video, decoder, etc.) which have Scart
sockets to the TV, you can use SCART socket of the TV.
Note: If an external device is connected via the Scart
sockets, the TV will automatically switch to
AV mode. If both sockets are employed at the
sime time, SCART 1 becomes the preferen-
tial.

Via Aerial Input

If the device you want to connect does not have a
Scart socket, you should connect it to the Aerial input
of the TV.
If the VCR is connected via Aerial input, it is
suggested to use Programme 0.

Decoder

If you are subscribed to cable TV offers, the
organisation will supply you a corresponding decoder
unit to allow the programmes to be unscrambled.
For further information consult your dealer.
Connect a decoder with an aerial socket to
the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket
to the TV
• Connect the decoder to the EXTERNAL socket of
TV with a RCA cable. Through the SCART/RCA
socket of the decoder, you may attain a better dis-
play resolution.

TV And Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a Scart cable to SCART sockets.

Playback NTSC

• Connect NTSC VCR player to a Scart socket of the TV.
Then, press the "AV" button to select EXT1 or EXT2.
English - 28 -