Timers - Hitachi 32LD8700TU Instructions For Use Manual

Timers

Display the Main Menu by pressing the "
button. Highlight the Timers line by pressing
or buttons and press "OK" button to
display the Timer menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Up to five separate timer events can be set
and each is displayed in the Programme
Timers screen, showing the event number,
the channel to be selected, the start time,
end time, date and the mode - whether that
event is active (and will be acted on) or not.
Programme Timers
No Channel Name Start
1. ITV 1 20:00 21:00 12/05/2005
2. BBC ONE 00:00 00:00 01/01/2005
3. BBC ONE 00:00 00:00 01/01/2005
4. BBC ONE 00:00 00:00 01/01/2005
5. BBC ONE 00:00 00:00 01/01/2005
6. BBC ONE 00:00 00:00 01/01/2005
Exit
Move/Change
MENU
• To set an event, highlight its mode using
or buttons and press "OK" button to dis-
play the timer entry window.
Type:
Name:
Start:
End:
Date:
Mode:
• Here the six settings of channel type, chan-
nel name, start time, end time, date and fre-
quency mode can be set. You can move
End Date Mode
Active
Inactive
Inactive
Inactive
Inactive
Inactive
10:42
04/07/2005
i
Edit Timer More
OK
TV
3. ITV
00:00
00:00
03/06/2005
Once
freely between each setting using
buttons.
"
• The channel type is set using
tons. It enables displaying only the selected
type channels.
• The channel name is set using
tons to display the channel which broadcasts
the programme.
• The start time, end time and date are each
set with the number buttons on the remote
control in 24-hour format.
• The frequency mode determines how often
the receiver operates this event and is set
with the or
Daily, or Weekly press "OK" button to com-
plete setup.
Hint
If an invalid number for the start or
end times or the date is entered,
"Entered time is not valid" message
appears on the menu.
RECORDING FROM IDTV
Connect your VCR to AV2 via a scart lead.
Set the AV2-OUT in the feature menu to
DDT, as illustrated and described on page
25.
Set the time as described above.
Set your TV to standby using the remote con-
trol.
Set your VCR to correspond with the time set
on your TV and select external input (refer to
your VCR instruction book).
NB. If you switch on your TV whilst the timer
recording is active and then switch back to
standby, the timer recording will be can-
celled; the timer setting will be deleted and
the desired programme will not be recorded.
- 20 -
or
or
buttons to be either Once,
or
but-
but-