Specifications - Sharp PN-K321 Operation Manual

nProduct Specifications
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Viewing angle
Screen active area
Response speed
Plug and play
Power management
Input terminals PC/AV
PC
Audio
Serial (RS-232C)
Output terminals Audio
Speaker output
Power requirement
Operating temperature
Operating humidity
Power consumption
(input signal waiting mode *
Dimensions (excluding protrusions)
Weight
*1 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 1.2 W
*2 When using the monitor in DC19.5 V : 87 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Specifications

PN-K321
32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD
(pixels) 3840 x 2160
Approx. 1.07 billion colors
0.182 mm (H) × 0.182 mm (V)
176° right/left/up/down (contrast ratio ≥ 10)
inch (mm) 27-31/64 x 15-15/32 (697.9 x 392.6)
8 ms (Gray to Gray, avg.)
VESA DDC2B
VESA DisplayPort
HDMI x 2
DisplayPort x 1
3.5 mm mini stereo jack x 1
3.5 mm mini jack x 1
3.5 mm mini stereo jack x 1
2 W + 2 W
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
32°F to 104°F (0°C to 40°C)
20% to 80% (no condensation)
93 W *
/ standby mode)
1
inch (mm) Approx. 29-17/32(W) x 1-25/64(D) x 17-3/8(H) (750 x 35 x 441)
(monitor only)
Approx. 29-17/32(W) x 10-3/32(D) x 19-17/64~24-31/32(H)
(750 x 256 x 489~634) (monitor on supplied stand)
lbs. (kg) Approx. 16.5 (7.5) (monitor only)
Approx. 28.7 (13.0) (monitor on supplied stand)
2 (5.9 W / 5.8 W) (when using the supplied AC adapter)
31
E