Turning Off The Radio - Fujitsu GPS User Manual

About AUTO.P
Because the AUTO. P function can be used to temporarily save stations for the
preset switches, stations saved manually will remain in memory even if AUTO. P is
used. Manually saving stations that are used regularly allows them to be restored
even after AUTO. P has been used, such as after traveling.
AUTO.P
Touching
the preset memories to their previous settings. (The stations saved with AUTO. P will
be deleted.) The diagram below shows how to switch between AUTO. P and
manual.
Touch
you hear a beep.
Manual
Touch
(The stations saved with
AUTO.P will be deleted)

Turning off the radio

Press .
● Pressing
again will turn on the radio and resume reception of the radio station
(channel) received before the power was turned off.
●AUTO. P may not automatically receive stations if radio waves in the surrounding
area are weak.
●A frequency saved with the tuning switch may not match the frequency saved
with AUTO. P even though the signal is received from the same station.
●Due to conditions for receiving radio waves, saved stations may differ even when
the AUTO. P switch is operated repeatedly in the same location.
●Up to six stations with good signal reception are automatically saved in order of
frequency (low to high).
●When less than six stations capable of reception are found, nothing is saved for
the remaining preset switches.
while AUTO.P is operating or after it has been used will return
AUTO.P
until
AUTO.P
Automatically saving
stations to preset switches
AUTO.P
(Search started)
AUTO.P
(Search
completed)
67