To Measure Each Channel Separately - Fujitsu GPS User Manual

Hide thumbs Also See for GPS:
Table of Contents

Advertisement

CANCEL
● Touch

To measure each channel separately

Insert the "Memory Stick Duo".
Touch
MEASURE
seconds, until you hear a beep.
● After touching the switch, a 10-second
count down begins. Leave the vehicle
during that time.
● Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results will appear on the
display. Measurement results for each
channel can be displayed by selecting
the desired channel.
● Measurements can be written to a
"Memory Stick Duo" and corrected
automatically using the E-iSERV
website.
CANCEL
● Touch
Because this function is designed to make measurement of frequency
characteristics easier, slight errors may occur in the measurement data under
some circumstances. The measurements obtained are not equivalent to the
precise measurements that can be made by professional measuring devices.
●Close all doors and windows while measurement is in progress.
●Sound quality data is written to the "Memory Stick Duo" as follows.
●The folders and files that are required for E-iSERV sound effect customizations
are created automatically when the data is written to the "Memory Stick Duo".
●Select a file in
website.
to cancel measurement.
for more than 2
to cancel measurement.
MSFTEN
SOUND
when uploading sound quality data to the E-iSERV
MSFTEN
SOUND
305*000.ftn
File extension
Three digit number
Adjustment mode
145

Advertisement

Table of Contents
loading

Table of Contents