Selecting A Peq Pattern From Memory; Measuring/Displaying Frequency Characteristics; To Measure All Channels At The Same Time - Fujitsu GPS User Manual

How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected
Adjusting sound quality
Touch a switch from
.
EQ5
● The preset pattern stored in memory
will be retrieved.
● Touch
settings. The PEQ mode adjustments
will be saved and the system will return
to the previous operation screen.

Measuring/Displaying frequency characteristics

Frequency characteristics inside the vehicle can be measured and displayed on the display.
The measurement result can be referred to when adjusting the parametric equalizer. These
measurements are also necessary to automatically correct parametric equalizer settings using
E-iSERV sound effect customizations.
Connect the accessory
microphone with a optional 5.1 ch
decoder/AV matrix unit.
● Align the microphone with the actual
ear position and attach it to the
headrest or other appropriate fixture.
(Attach the microphone using tape or
string.)
Touch
MEASURE
than 1 second).
● After touching the switch, a 10-second
countdown begins. Leave the vehicle
during that time.
● Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results will appear on the
display.
144

Selecting a PEQ pattern from memory

to
EQ1
BACK
after making

To measure all channels at the same time

briefly (less