Setting Woofer Output; Setting Crossover - Fujitsu GPS User Manual

Basic operation
Adjusting sound quality
The sub-woofer output can be set to STEREO or MONO. Select the method that matches the
output method for the connected sub-woofer system.
Touch
STEREO
WOOFER OUTPUT.
● Touch
settings. The woofer output setting will
be saved and the system will return to
the previous screen.
The frequencies for the front and rear speaker high-pass filter (HPF) and sub-woofer low-pass
filter (LPF) can be set within a range of 63 to 200 Hz. (This is the same as setting the HPF and
LPF cutoff frequencies.)
Touch
off frequency.
Touch 6dB/oct
to select the slope.
PASS
● Touch
settings. The crossover setting will be
saved and the system will return to the
previous screen.
If no sub-woofer has been connected, set the slope adjustment to "PASS". (If slope
is set to a setting other than PASS, the low frequency range will not be output from
the speakers.)
44

Setting WOOFER OUTPUT

or for
MONO
BACK
after making

Setting crossover

or to select the cut
, 12dB/oct or
BACK
after making