Table of Contents
Advertisement
Before Switching on your TV
Before Switching on your TV
Power connection
AC adapter
To POWER
INPUT DC 15 V
termi nal
IMPORTANT: The TV set is designed to operate on
15 V DC. For this, an adaptor is used which
gives 15V DC voltage. Connect this adaptor
to a system that supplies 220-240V AC, 50
Hz.
• After unpacking, allow the TV set to reach the ambi-
ent room temperature before you connect the set to
the mains.
Connections to the Aerial socket
75W
VHF/UHF
T V REA R PA NEL
• Connect the aerial or cable TV plug to the aerial
socket on the back of the TV. If you are also con-
necting a video recorder or satellite receiver you
should connect the aerial or cable plug to this device
first and then connect the RF out socket on the de-
vice to the aerial socket on the TV (see P27 for more
details).
How to connect other devices
IMPORTANT: Switch off the TV before connecting
any external device.
Sockets for external connections are at the back of
the TV. For connection of other devices via Eurocon-
nector refer to the manuals of the related devices.
Inserting batteries in the remote
D C 15V
2 /
1 /
PC I N PU T
PC A U D I O
A N T. 75 W
control handset
• Remove the battery cover located on the back of
the handset by gently pulling upwards from the indi-
cated part.
• Insert two AAA (R03) or equivalent type of batteries
inside.
• Replace the battery cover.
NOTE: Remove battery from remote control handset
when it is not to be used for a long period.Otherwise it
can be damaged due to any leakage of battery.
CABLE TV
11
Advertisement
Table of Contents
