Your Lcd Tv; The Option Setting - Hitachi L19D01UB Instruction Manual

Your LCD TV

How to setup the TV
Use an antenna cable to connect to the LCD TV's ANT. terminal (refer to page 15).
Insert the 2 batteries supplied in remote control.
Step1 Press and lift the back cover up to open the battery
compartment of the remote control.
Step2 Insert two AAA size batteries. Make sure to match the (+) and ( - )
ends of the batteries with the (+) and ( - ) ends indicated in the battery
compartment. To close the battery compartment cover, slide the cover
in the direction of an arrow till it clicks shut.
Do not use caustic cleaners (porcelain, stainless steel, toilet,or oven cleaner etc.) on the on the TV and
remote control, as they may be damaged.
Handling the Remote Control
Improper use could cause corrosion or battery leakage and may result in physical injury and/or property
Never mix used and new batteries in the device.
Replace all the batteries in a device at the same time.
Remove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible failure, read the following instructions and handle the remote control properly.
Do not drop or cause impact to the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under the direct sunlight or near sources of excessive heat.
NOTE: Remove the battery from remote control handset when it is not to be used for a long period.
Otherwise it can be damaged due to battery leakage.
3
Connect another external A/V device (refer to page 15-19).
Effective range
Your remote control can be activated from up to the LCD TV 5m away when pointed
directly at the receiver.
6
30 O 30 O
5M