Hitachi L19D01UB Instruction Manual page 42

Quick
Start
Guide
L19D01 UB/UW/CB/CW
GB
L22D01 UB/UW/CB/CW
PLEASE NOTE:
By using a SCART lead (not supplied) you can improve
the quality of playback and sound. Remember you must
still have the aerial lead (not supplied) connected. If you
are using a SCART lead you should not have to tune
your TV to your video, instead select the SCART channel
by pressing the TV/Input button on the remote control.
1
Insert batteries into
Remote Control
Use 2 x AAA size batteries.
2
Connect aerial
2
Do not connect the TV to the mains supply until
you have completed all the connections.
If you just want
Connect one end of the aerial lead to the aerial
to connect your
socket on the wall and the other end of the lead to
TV to an aerial
the appropriate socket on the back of your TV.
Now go to stage 4.
connect it as shown
opposite.
If you want to
connect your TV
to a VCR
go to stage 3a.
If you want to
connect your TV
to a VCR and
a Satellite/Cable
box then
3-pin mains plug for UK model
go to stage 3b.
2-pin mains plug for EU model
3a
Connecting to a VCR
A
If you have a SCART lead, connect one
end of the lead to the SCART socket on
your VCR and connect the other end to
the SCART socket marked SCART on the
back of your TV.
B
Connect one end of the RF
lead to the aerial socket on
your TV and the other end to
the socket marked RF OUT
on the back of your VCR.
C
Connect your aerial lead
to the socket marked RF
IN on the back of your
VCR.
Now go to stage 4.
4
Switch on
A
Plug your TV and any other equipment that you have connected into the mains.
B
Press the AC SWITCHon the back of your TV to switch on your TV's power.
C
I
Then press the button on the front side view of your TV to switch on your TV. The screen will be blue
screen.
Note:
It is recommended to complete the VCR channel set up before the TV tuning process.
Connect your VCR to the TV and the antenna, then switch it on. Insert a pre-recorded tape and press
PLAY. This can help you to easily find the VCR channel as it will play the pre-recorded tape.
Before you start up the TV tuning process, the Satellite/Cable channel set up are recommended to
complete prior to the TV tuning process.
Connect your Satellite/Cable box to the TV and the antenna, and then switch it on. Select a channel
that you will easily recognise. This can help you to easily find the satellite/cable channel since the TV will
play that selected channel.
3b
OR
Do not connect the TV to the mains supply until you have completed all the connections.
Note: 2-pin mains plug for EU model; 3-pin mains plug for UK model.
A
B
C
5
A
B
C
D
E
Connecting to a VCR and
a Satellite/Cable box
A
Connect one end of an RF lead to the aerial
socket marked
to the socket marked RF OUT on the back of
your VCR.
B
Connect one end of another RF lead to the
aerial socket marked RF IN on your VCR and
the other end to the socket marked RF OUT on
the back of your Satellite/Cable box.
C
Connect your aerial lead to the socket marked
D
RF IN on the back of your Satellite/Cable box.
A
VCR
VCR
D
If you have SCART leads connect one end to
B the socket marked SCART on the back of your
TV, and connect the other end to the SCART
Satellite/Cable Satellite/Cable
socket on the back of your VCR.
Box
Box
C
Now go to stage 4.
Select & Start Auto installation menu
Turn on the TV. Press the MENU button on the remote control to enter the menu option.
to select SETUP, then press OK to highlight Auto Installation. Press OK again
Press
for you to input the DEFAULT PIN Number "0000".
Press OK, and then press to select Country first, then press OK to confirm.
button to select the Start Search, and press OK to confirm. Press the
Press
select "YES". The unit will start Auto Search. Please be patient as this process will take
a few minutes.
When Auto Installation is completed, press EXIT to exit the screen.
on your TV and the other end
DVD
EJECT MENU
TEXT
DVD
ZOOM AUDIO SUBTITLE
REPEAT
ANGLE
button to
LHD01