Important Note - Hitachi L26HP03E Instructions For Use Manual

Digital lcd colour television
Hide thumbs Also See for L26HP03E:
Table of Contents

Advertisement

start A.P.S. (Auto Programming System)
1
When the TV is turned on for the first time, the menu for the language selection
appears on the screen. The messag e "Welc ome ple ase sel ect your
language!" is written in all language options sequentially in the menu on the
screen. By pressing
press OK. After then, First time Installation Menu will appear on screen. By
pressing
or
buttons, select country item you want to set and press OK button.
2
After the First Time Installation is set, the following message appears on the
screen.
Do you want to start an automatic channel scan?
To start automatic search, select "Yes", to cancel select "No". This process will
take about five minutes. To cancel searching, you can press "MENU" button at any
time during the process.
3
After Automatic Search process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using
then press the RED or OK button
4
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
5
For details, please refer to the Install Menu section of the instruction book.

important note.

Once the TV has found all your local stations, they are then automatically
assigned a programme numberand name, if available from the broadcast.
or
buttons highlight the language you want to set and
or
button and

Advertisement

Table of Contents
loading

Table of Contents