Setup Menu (Av Mode) - Hitachi 55PD9700C User Manual

TV SETUP OPERATION (continued)

Setup Menu (AV mode)

With this menu, you can select or adjust the condition of the input signals from each terminal.
Selected Items
System 1
System
System 2
Colour
AV1~AV5
system
AV1
Video
Input
AV4
DTT
Scart
TV
Output
Monitor
Auto
PAL
System 1 SECAM
NTSC4.43
NTSC3.58
Auto
NTSC-M
System 2
PAL-M
PAL-N
S.Video
Composite
Auto
HDTV
SDTV/DVD
Setup hint
Do not change the original setting.
(System1: Europe/Asia, System2:North America)
Composite and S-video input only.
Select the colour system depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], select the system according to the colour system
of the input signal.
Composite and S-video input only.
For AV1 : Select depending on the type of input signal.
The default setting is [Composite].
Select [S.Video] when you want to watch S.Video image.
For AV4 : Select the colorimetry depending on the input
signal.
Generally, select [Auto].
In case that the colour is not displayed correctly, select
[HDTV] or [SDTV/DVD] to match the input signal.
Component Input only.
AV1 (Scart) will be fi xed as the selected mode.
When selecting "Monitor", it is possible to monitor only
the composite video signal from AV2, AV3, AV4, or AV5
input that is displayed on the screen at the same time.
If "Descrambler" is set to ON when selecting other than
DTT, it will be fi xed as "TV" automatically.
Setup
System System 1
Colour System
Video Input
Scart Output TV
Select Set Return
27