Color Temp - Hitachi PJ-TX300E User Manual

Item

COLOR TEMP

(Continued on next page)
This projector provides 4 pre-set modes and 4 custom color
temperature modes.
To select a mode
Using the ▲/▼ cursor buttons in the COLOR TEMP menu changes
the color temperature mode. The mode that the yellow highlight bar
is on is the currently selected mode.
6500K  7500K  9300K  Hi-BRIGHT
CUSTOM-1  CUSTOM-2  CUSTOM-3  CUSTOM-4
 6500K, 7500K, 9300K
These modes set the same color temperature as
the mode name.
 Hi-BRIGHT
The mode is prepared thinking much of the
brightness of the image with the maximum gains of
all colors.
 CUSTOM-1, CUSTOM-2, CUSTOM-3, CUSTOM-4
These modes can be customized based on one of the pre-set
modes.
To adjust a CUSTOM mode
(1) Select one of the CUSTOM modes to adjust using the ▲/▼
cursor buttons. Then press the ► cursor button to display the
CUSTOM dialog.
Note that pressing the ▲/▼/► cursor buttons or the ENTER
button in the CUSTOM dialog will erase the current settings of
the selected mode. If you want to keep the settings, please press
the ◄ cursor button to return to the preceding menu, and select
a different CUSTOM mode.
(2) Select the base mode to be adjusted using the ▲/▼ cursor
buttons. Then press the ► cursor button to display a dialog with
3 sets of 3 adjustment bars. Each set corresponds to a step of
the color temperature, and every set has 3 adjustment bars for
red, green and blue. The names of selected mode and the base
mode are shown at the bottom of the dialog.
COLOR TEMP
6500K
7500K
9300K
►
Hi‑BRIGHT
CUSTOM‑1
CUSTOM‑2
CUSTOM‑3
CUSTOM‑4
Advanced Menu (PICTURE menu)
Description
CUSTOM‑1
LOW
R G B
Select
the reference
►
6500K
HIGH
7500K
MIDDLE
9300K +0 +0 +0 +0 +0 +0 +0
LOW
Hi‑BRIGHT
CUSTOM CUSTOM‑1 [7500K]
COLOR TEMP
6500K
7500K
9300K
Hi‑BRIGHT
CUSTOM‑1
CUSTOM‑2
CUSTOM‑3
CUSTOM‑4
ENTER:
MID HIGH
R G B R G B
OFFSET
R G B R
+0
+0
39