Table of Contents
Advertisement
4
PRECAUTIONS
HOT
Do not touch or block
the ventilation holes
NEVER
look directly into the Lens
QR49701
Please read the main users guide for more detailed information before use
Installation of your PJ-LC2001 Liquid Crystal Projector
• Please make sure that the projector is installed in the horizontal position.
If it is used either side or end up, it may cause the projector to overheat, which
may lead to damage to the projector
• Extra care should be taken to be sure not to block the ventilation holes
WARNING! Please be sure to use the correct mains lead with your projector
1
Inserting the battery into your remote control
handset
• Pull out the battery holder from the rear of the control,
by use of the slot
• Insert the battery with the positive ( + ) side facing
upward
• Push the holder back into position in the remote control
quick guide
EUROPE
UK
Slot
"+" side
Pull out
Battery Holder
Advertisement
Table of Contents
