Programming A Selection - Meridian 808I User Manual

USING THE 808 PREFACE
SIGNATURE REFERENCE
CD PLAYER

Programming a selection

You can programme a selection of tracks and then play only the tracks you
have programmed.
You can programme a selection either by storing the tracks you want to
play, or by clearing the tracks you do not want to play. If you programme a
selection by storing the tracks you want to hear, you can play the tracks in
any order and repeat tracks in the sequence.
You can programme a selection while the disc is playing, in which case the
selection will be played after the current track fi nishes.
To choose a track to programme
• Press [ or ] to step through the track numbers until the track you want
is displayed, or type the number of the track you want.
To make a selection by adding tracks
• Choose the fi rst track you want to play, as described above.
The display will show the track
number; for example:
• Press Store.
The track will change from Track to Store, and all the other tracks will be
marked Clear.
For example:
You should store the fi rst track for a selection within two seconds, or it will
begin to play.
To make a selection by omitting tracks
• Choose one of the tracks you do not want to play, as described above.
The display will show the
track number; for example:
• Press Clear.
The track will change from Track to Clear, and all the other tracks will be
marked Store.
For example:
Track
Store
Track
Clear
13
14
14
12
12