Fuses - Mazda 8T12-EA-03K User Manual

Mazda6_8T12-EA-03K_Edition1 Page280
Friday, December 5 2003 8:59 AM
Maintenance and Care
Owner Maintenance
Trunk light (Sedan)
1. Press both sides of the lens cap to
remove it.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
8-38
Form No.8T12-EA-03K
Black plate (280,1)

Fuses

Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
qFuse Replacement
Replacing the fuses on the driver's side
kick-panel
If the electrical system doesn't work, first
inspect fuses on the driver's side kick-
panel.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover by sliding
the cover straight back toward you.
Fuse panel cover
CAUTION
Pulling the cover off sideways may
break the retaining tabs off.