Accessory Socket - Mazda 8T12-EA-03K User Manual

Mazda6_8T12-EA-03K_Edition1 Page219
Friday, December 5 2003 8:58 AM

Accessory Socket

The ignition switch must be in the ACC
or ON position.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC12 V, 10 A).
CAUTION
To prevent accessory socket damage or
electrical failure, pay attention to the
following:
Don't use accessories that require
l
more than 120 W (DC12 V, 10 A).
Don't use accessories that are not
l
genuine Mazda accessories or the
equivalent.
Close the cover when the accessory
l
socket is not in use.
Correctly insert the plug into the
l
accessory socket.
NOTE
To prevent discharging the battery, don't
use the socket for long periods with the
engine off or idling.
Form No.8T12-EA-03K
Black plate (219,1)
Interior Equipment
When placing an electrical device (e.g.
cellular phone) in the tray which is
connected with the accessory socket, pass
the plug cord through the slot in the cap.
Cap slot, closed
Cap slot, opened
1. Open the lid by pulling the upper
release catch.
2. Remove the tray mat.
3. Using a coin, turn the cap
counterclockwise (about 45° from the
closed position) and remove it.
4. Open the tray by pulling the lower
release catch.
Interior Comfort
6-55