Mark Levinson 32 Owner's Manual page 18

Getting Started
1-10
6. Reconnect the Nº32 and all associated components to electrical
outlets.
7. Power the Nº32 and all associated components on. Power
amplifiers should be powered on last.
8. Rotate the Nº32 select knob or press the select
the remote to select the Nº32 input that corresponds to the
Nº32 input connectors that were selected in step 4 on page 1-9.
• The Nº32 front panel display indicates the name and
volume level of the selected input.
• Factory-default input names correspond to their assigned
stereo input connector. For instance, Input 1 is assigned to
the input connectors numbered 1, Input 2 is assigned to the
input connectors numbered 2, and so on.
9. Make sure Nº32 master volume is set to a reasonable level.
Then, begin playing the desired input source.
Mark Levinson
/ buttons on