Escient FireBall E-120 Remote Control Manual page 18

Example:
[TV] <<Code Set>>
Upon entry of an invalid key sequence, the remote control will display one long blink and return
to normal operation.
The remote will exit programming state and return to normal operation if 10 seconds has
elapsed between key presses.
Mode Reassignment (992)
This feature will change a selected device Mode Key to the desired device Mode
Key. For example, an AUX device mode key (destination mode) could be changed to an
additional VCR device mode key (source mode) to facilitate the operation of two different VCR
devices.
<< Code Set >> 9
The ID in the destination mode now is the default ID of the source mode. The remote will blink
two times after successful completion of the programming sequence. The remote will time out
after 10 seconds during programming.
Example: To designate the AUX key to become a second DVD key
<< Code Set >> <9>
Reset to Defaults
Operational Features Reset (980)
Clear all setup features not related to ID code setup. Namely, Key Movers, Volume lock, ID
lock, and any EEPROM information related to these features.
<< Code Set >> 9
The remote will blink two times, pause, then blink two more times after successful completion
of the programming sequence. There will be 2 blinks if no EEPROM or EEPROM is bad. The
remote will time out after 10 seconds during programming.
Manufacturing Reset (981)
Functions the same as the Operational Reset (980) with the exception that the remote resets
to the default ID and additionally clears all EEPROM data including all upgraded codes:
<< Code Set >> 9
The remote will blink two times, pause then blink two more times after successful completion of
the programming sequence. There will be 2 blinks and one long blink if EEPROM is bad. The
remote will time out after 10 seconds during programming.
Basic User Reset (977)
Similar to the Operational Features Reset (980) with the exception that the remote will reset
codes to the default settings:
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
<9> <9> <3>
9 2 Source Mode
<9> <2> <DVD>
8 0
8 1
FIREBALL REMOTE CONTROL GUIDE WD006-1-1
<Volume Down>
Destination Mode
<AUX>
12/23/2003