Escient FireBall E-120 Remote Control Manual page 5

FIREBALL REMOTE CONTROL GUIDE WD006-1-1
12/23/2003
FireBall Wireless IR Keyboard
The Escient FireBall, TuneBase 200, and PowerPlay include a wireless IR keyboard with
universal remote control capabilities. The keyboard can be programmed to operate one
Escient product and four other devices.
Only the FireBall source button (the one with the swoop) can be programmed to operate
the FireBall, TuneBase, or PowerPlay. The four source buttons on the remote labeled TV,
VCR, CBL, and AUD can be programmed to operate other devices.
WARNING!
The CBL source button is not programmed to control any device by default. We recommend
that you do not program the CBL button for another source, but if you choose to program the
CBL source button, note that the POWER key on the keyboard will no longer power the
FireBall on/off.
Programming the Keyboard to Control FB, TB or PP Sources
Swoop
Button
The FireBall (swoop) source button is preprogrammed at the factory to correspond to the FB
button on the remote. The FireBall source button can be programmed to correspond to any of
the FB source buttons using the following method:
Press Swoop
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com